Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Belmont, CA
Chimney repair in Belmont is shaped by what gets built here and what grows over it. Most homes in this city date to the 1940s through 1970s, which means clay-tile flues, shallow fireboxes, and masonry that predates current draft and clearance standards. That alone produces steady repair work. Add heavy oak and eucalyptus canopy across the hillside streets, and you get crowns, caps, and flue tops that foul with leaves, twigs, and nesting material far faster than elsewhere on the Peninsula. We handle the full range of chimney repairs in Belmont, from rain caps and flashings to full liner replacements, using professional-grade systems like DuraFlex and HeatShield. If you’re seeing signs of flue damage or water intrusion, call (833) 620-7463 for a straight answer and a free estimate.
Why Belmont Homes Are Different
Belmont sits on the wooded eastern slope of the Santa Cruz Mountains, and that geography dictates what we find inside chimneys. The pre-1980 housing stock here is overwhelmingly mid-century ranchers and split-levels, many with original masonry fireplaces and clay-tile liners that were sized for more forgiving draft conditions than today’s codes expect. In the flats near downtown and along the older tracts off El Camino, we regularly see undersized flues and shallow fireboxes that make modern gas inserts and high-efficiency wood stoves a tight fit without liner work or firebox modification.
The tree canopy is the other half of the story. Belmont neighborhoods above Ralston Avenue and along the canyon streets are shaded by mature oaks and eucalyptus that drop continuous loads of leaves, bark strips, and twigs onto chimney crowns and into flues. During the wet season, from November through April, that debris stays damp for weeks. We pull packed, half-composted leaf litter out of caps and flue tops all winter, and we see the consequences of that moisture in mortar deterioration and flashing rust years earlier than in sun-exposed, treeless parts of the Peninsula. A Belmont chimney does not fail from heavy creosote buildup the way a cabin chimney in the Sierras might; it fails from damp, organic debris, and the slow, persistent work of water getting where it should not be.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Belmont Services
Most Belmont homeowners call us for one of two reasons: a chimney that needs sweeping and inspection, or a dryer vent that has gone too long without cleaning. Both are handled by our own technicians.
Chimney Sweep in Belmont
A sweep in Belmont usually means more than creosote removal. Because of the tree cover, our technicians routinely pull oak leaves, eucalyptus litter, and the occasional squirrel or bird nest out of flues and caps before they even start brushing. That debris, left damp through the rainy season, is a fire risk and a blockage risk at the same time. We sweep the full flue, inspect the liner and smoke chamber, and give you a plain-language report with photos of anything we find. Full details on what a sweep includes and what it costs are on the dedicated page. Chimney Sweep in Belmont
Dryer Vent Cleaning in Belmont
Dryer vents are the fire risk most homeowners underestimate, and Belmont’s older housing stock makes it worse. Many mid-century homes here have long, multi-turn dryer duct runs through crawl spaces or interior walls, and those runs collect lint in places no homeowner ever sees. We clean the full duct run from dryer to exterior termination, check airflow, and clear any blockages. Dryer Vent Cleaning in Belmont
Chimney Repair in Belmont
Chimney repair in Belmont is usually water-driven. The clay-tile flues in mid-century Belmont homes crack and spall over time, and once the Peninsula’s wet season starts, rainwater follows those cracks into the masonry. We see the pattern repeatedly in the older tracts near downtown: a crown that has lost its proper slope, flashing that has pulled away from the roofline, and a tile liner that shows vertical cracks when we scope it. The good news is that most of these problems are fixable without rebuilding the chimney from scratch. Our repair work uses professional-supply-house components from brands like HeatShield and Olympia Chimney, not hardware-store substitutes. Read more about our repair scope on the Chimney Repair service page.
Chimney Cap Installation
Signs you need it
If you can look down your flue from the roof or an upper window and see daylight with no metal cap, or if you have found leaves, twigs, or nesting material inside the firebox, the flue is uncapped.
What it costs in Belmont
A standard stainless or galvanized chimney cap installed in Belmont typically runs $250 to $450, with copper caps running $500 to $800 depending on flue size and roof access.
How we do it
We measure the flue tile, select a cap with the correct screen mesh and mounting style, secure it to the flue or crown, and seal all fasteners so rain cannot follow them into the masonry.
Chimney Liner Installation
Signs you need it
If a camera inspection shows vertical cracks, spalling tiles, or gaps between flue tile sections, or if you are installing a gas insert or high-efficiency appliance that requires a correctly sized flue, the liner needs to be addressed.
What it costs in Belmont
A stainless steel liner replacement for a typical Belmont chimney runs $2,500 to $4,500 for a straight, single-story masonry flue, with two-story and offset flues adding $300 to $800 in most cases.
How we do it
We scope the flue first to confirm dimensions and damage, then install a DuraFlex stainless steel liner system sized to the appliance and venting requirements, with insulation where code or performance calls for it.
Chimney Flashing Repair
Signs you need it
If you see water staining on the ceiling or walls adjacent to the chimney, or if the metal flashing at the roofline is lifted, rusted, or pulling away from the brick, the flashing has failed.
What it costs in Belmont
Flashing repair in Belmont typically runs $450 to $900 for a standard repair section, with full replacement of all flashing around the chimney running up to $1,500 on steeper hillside roofs.
How we do it
We remove the damaged flashing, inspect the underlying roof deck and chimney crown, install new step and counter flashing with proper overlap, and seal everything so water sheds away from the chimney.
What Chimney Repair Costs in Belmont
| Item | Typical range in Belmont |
|---|---|
| Chimney cap installation | $250 – $450 (copper: $500 – $800) |
| Chimney liner installation | $2,500 – $4,500 |
| Flashing repair | $450 – $900 (full replacement up to $1,500) |
Do I really need a new liner, or can it wait?
If the liner has vertical cracks or missing tile sections, do not wait through another wet season. Water entering through a damaged liner accelerates masonry deterioration and can create a fire hazard when the fireplace is used. Call (833) 620-7463 and we will scope it and show you exactly what we see before recommending anything.
Can you fix my chimney crown without rebuilding the whole chimney?
Usually, yes. A deteriorated crown can be ground down and resurfaced with a proper cementitious material as long as the underlying masonry is sound. In Belmont’s damp, shaded conditions, a good crown is what keeps water out of the entire chimney system. We will tell you plainly if the damage has gone too deep.
Brands We Service in Belmont
We install and service components from HeatShield, Gelco, Olympia Chimney, and Famco. These are the brands chimney specialists stock, not what you would find at a big-box hardware store. We keep common cap sizes, liner components, and flashing materials available for Belmont jobs, which keeps most repairs to a single visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Belmont, CA
| Service | Typical range in Belmont |
|---|---|
| Chimney sweep with inspection | $200 – $350 |
| Chimney cap installation | $250 – $450 |
| Chimney cap replacement | $300 – $500 |
| Chimney liner installation | $2,500 – $4,500 |
| Chimney flashing repair | $450 – $900 |
| Chimney crown repair | $400 – $1,200 |
| Dryer vent cleaning | $150 – $250 |
What pushes prices up in Belmont is roof access. Hillside homes with steep pitches, two-story chimney stacks, and difficult ladder setups add labor time that flat-lot ranchers do not. The tree canopy also means we sometimes find cap and crown work that is more involved than a standard installation because of built-up debris and trapped moisture. Whatever the job, we give you a flat price before any work starts, and the quote we give is the quote you pay.
Neighborhoods We Serve in Belmont
We work across all of Belmont, from the older rancher tracts near downtown up through the hillside streets above Ralston Avenue. Most of our Belmont appointments are scheduled within a week, with flexibility for weekday arrivals depending on the neighborhood and the season.
- Downtown Belmont and the flats near El Camino Real
- Haskins and Central neighborhoods
- Carlmont and the hillside streets above Alameda de las Pulgas
- Hallmark and the canyon areas along Ralston
- Homeview and the western slopes toward Crystal Springs
Service Area – Cities Near Belmont
Chimney Cleaning Palo Alto serves Belmont and the surrounding Peninsula communities. We regularly work in San Carlos, CA, Foster City, CA, North Fair Oaks, CA, and Menlo Park, CA, giving homeowners across the mid-Peninsula one team for chimney, repair, and dryer vent work.
Serving Belmont, CA – Our Local Coverage Area
We’re based in the Belmont area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Belmont
Most Belmont appointments are scheduled within five business days. If you have an active leak around the chimney or visible cap damage, tell us when you call and we will do our best to get a technician out sooner. Call (833) 620-7463 and we will give you the next available window.
Most chimney repairs, including caps, flashing, crown work, and liner replacement, do not require a city permit in Belmont. If a job involves structural rebuilding beyond the standard repair scope, we will tell you upfront whether permit coordination is needed.
Yes. We cover the entire 94002 ZIP code in Belmont, from the downtown flats up through the hillside neighborhoods and canyon streets. Our crews are familiar with the access challenges on the steeper lots and come prepared for them.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Belmont Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Adam Schaefer"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Hector Herrera"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Whitney Quinn